CyClean™ 35
Sanitation Carts
Sanitation Carts for the CyClean™ 35 Parts Washer hold your process parts while inside the washer for easy and automated Clean-Out-of-Place (COP) parts washing.
Available in Standard Sanitation Cart configurations for washing a high volume of the same parts, or customize with our Modular Sanitation Cart and Parts Modules to build a solution for your specific set of parts to wash.
Standard Sanitation Carts
Part #344585
C35 Totes Sanitation Cart
$7,750
8 Totes & Lids
Tote Dimensions
- Width = 18" (MAX)
- Length = 14" (MIN) - 26″ (MAX)
- Depth (if washing lid) = 5″ (MIN) – 8″ (MAX)
- Depth (without lid washing) = 5" (MIN) - 10' (MAX)
Tote Lid Dimensions
- Width = 18″ (MAX)
- Length = 14″ (MIN) – 26″ (MAX)
- Depth = 2″ (MAX)
Notes
- Ships in 2-3 weeks
- Suitable for Totes, Bus Tubs, Food Storage Boxes, and More
- Maximum combined depth for totes and lids is 10". If the tote exceeds 8", it will reduce the allowed lid thickness. (i.e. a 9" deep tote can only hold a lid 1" deep)
Part #349283
C35 Weigh Scale Sanitation Cart
$12,200
Up to 80 Hoppers
Part Dimensions
- Length = 13″ (MAX)
-
Height = 10″ (MAX)The maximum number of hoppers per shelf is limited to 36 inches.
- Can be configured to hold parts from various manufactures, such as Multipond, Yamato, and Ishida
Notes
-
Ships in 2-3 weeks
- Suitable for Weighting System Scale Buckets, Prefeed Hoppers, & Weigh Hoppers
Part #344578
C35 Baking Trays Sanitation Cart
$7,750
42 Baking Trays
Dimensions
- Width = 17.25″ (MIN) – 18.5″ (MAX)
-
Length = 25″ (MIN) – 26″ (MAX)
-
Height = 1.25″ (MAX)
Tray Dimensions
- Width = 18" (MAX)
- Length = 14" (MIN) - 25″ (MAX)
- Height = 5″ (MIN) – 8″ (MAX)
Notes
Part #344584
C35 Buckets Sanitation Cart
$7,750
24 Buckets & Lids
Dimensions
- Width = 9″ (MIN) – 11.875″ (MAX)
- Length = 9″ (MIN) – 11.875″ (MAX)
- Height = 9.25″ (MIN) – 15″ (MAX)
Tray Dimensions
- Width = 9″ (MIN) – 11.875″ (MAX)
- Length = 9″ (MIN) – 11.875″ (MAX)
- Height = 1.375″ (MAX)
Notes
Build Your Own
Designing Side A
Side A · 0 / 16 slots
TOP
Drop a module on Side A
Modules stack from the bottom upward.
BOTTOM
Side A stack order
Bottom to top
