Product Resources
Literature
BWX-600-S
Technical Datasheet
CleanWorx™
Brochure
Videos
BWX-600-S Buggy Washer
Typical Packages
BWX-600-S
Buggy Washer
BWX-600-S
Buggy Washer
+ Preferred Accessories
Technical Datasheet
Frequently Asked Questions
Space Requirements: 260″ L x 136″ W x 105″ H. Adjustable feet can be used to level the machine. It is recommended to install near an available floor drain.
Electrical Requirements: 200 Amp @ 460VAC, 3 phase, 60Hz
Water Requirements: Supply water between 10-40 gpm with a drain capable of 20 gpm or greater. The supply water temperature is recommended to be 10-15°F hotter than the desired operating temperature.
Exhaust Requirements: Supplied by end-user
An option is a feature or component that is added to a product at time of purchase. This may involve removing components such as the heater, using specific brand parts, or accommodating particular manufacturing requests, such as material finishes. Unfortunately, to maintain consistent pricing and lead times, we cannot accommodate any custom options for individually purchased BWX-600-S Buggy Washers.
If you are an OEM or you are looking to purchase multiple BWX-600-S Buggy Washers, unique customizations and options may be available. If this is of interest, please contact us to discuss your needs further.
The Buggy Washer product line does offer several accessories that can be added to a product after purchase. If you have any questions about our available accessories or if you don’t see an accessory that meets your application requirements, please reach out to us so we can discuss your application in more detail.
A typical cleaning shift for the BWX-600-S Buggy Washer begins with the operator filling the 120-gallon sump with water. The water is then dosed with cleaning chemicals and reused multiple times throughout the shift. This initial 120-gallon fill can last an entire 8-hour shift; however, depending on the type and amount of soil, it may need to be drained, refilled, and re-dosed with chemicals at a different interval. In addition to this fixed sump volume, each buggy being cleaned will use anywhere between 5 to 15 gallons of fresh rinse water to remove any residual chemicals.
The BWX-600-S Buggy Washer is capable of cleaning up to 20 buggies per hour. In cases where the buggies are heavily soiled and require the maximum rinse water (15 gallons per cycle), the total water usage during an 8-hour shift can reach 2,500 gallons. For a different scenario—washing 12 buggies per hour with 10 gallons of rinse water per cycle—water usage can be as low as 1,080 gallons per shift.
How often you inspect and clean your strainer depends on your specific application. We recommend inspecting your strainer frequently until you can establish a maintenance schedule that meets your needs.
The BWX-600-S Buggy Washer is designed specifically to hold and clean industry-standard 400lbs (300L) and 600lbs (400L) dump buggies, but on-board adjustments can be made to accommodate buggies with the dimensions shown below.
Overall Height = 38″ (max)
Bin Width = 26″ (max)
Bin Length = 27″ (max)
Lug Height = 9-1/8″ (min) / 10-5/8″ (max)
If you would like to discuss your specific buggy dimensions to ensure a proper fit, please contact us today!
The BWX-600-S Buggy Washer has an on-board chemical dispenser that can add chemical to your sump. From a simple on-board controller, you can choose to dose through either timed injection or based on the desired conductivity measured in the sump.
Are you interested in this Buggy Washer, but don’t have CAPEX funding? Sani-Matic’s Leasing Program may be a solution for you.
Benefits Include:
